WATER PROOFING SOLUTIONS
Kenbro waterproofing products are formulated to stop water leakages and moisture ingression in a variety of new and existing structures. Our versatile, market leading and innovative technologies are suitable for waterproofing all types of constructions including residential and commercial spaces, industrial sites, water management facilities for potable water and wastewater, pipes and below ground structures.
OUR SOLUTIONS
We have a wide range of waterproofing solutions geared towards:
- BATHROOM WATERPROOFING
- BELOW GROUND WATERPROOFING
- EXTERNAL WALL WATERPROOFING
- INTERNAL WALL WATERPROOFING
- ROOF WATERPROOFING
- WATER TANKS WATERPROOFING
Kenbro Kenseal 1K
A cementious chemical waterproofing for Stone Walls & Brick Works. To be applied on the positive side. Can be used also on Concrete, Light Weight Thermablocks. Ideal for water tanks & ponds and Safe for potable water.
Packaging: 18 Kg
Coverage: Approximately 1 to 1.5 Kgs per Sq.mt per coat depending on the surface to be applied on. Two coats application.
Hyseal Waterproof cement
This Hyseal Waterproof cement is a blend of active chemicals to waterproof any concrete structure by way of a reaction acting on the cement particles and water in the concrete thereby forming insoluble crystal in the pores of the concrete to block the passage of water. It is most active when mixed with the concrete or mortar in the mixer.
Packaging: 1 Kg
Coverage: 1 Kg Bag to be added with 50Kg of Cement
Benefits
1. Economical waterproofing solution to reduce water absorption.
2. Compatible with all sorts of concrete & plaster enders
3. Works best with concrete structures
HYSEAL 501
Hyseal® 501 is most active where moisture is present in the concrete. Field tests have proven outstanding when mixed with mortar and applied as a render on stone and concrete block wall surfaces, can be applied to all water retaining and water excluding concrete structures. Besides, Hyseal® 501 penetrates the concrete to whatever depth water can penetrate; it hardly influences the reinforced steel in the concrete.
Packaging: 20Kg
Coverage: 0.75 kg per coat, brush applied. Total two coats application.
Benefits
1. This is a multipurpose compound used for both casting concrete and plaster works.
2. Compatible with all sorts of concrete with admixtures or without.
3. Works best with concrete as it penetrates into the concrete to seal all the micro pores that allow water to penetrate through.
4. Economical waterproofing solution to reduce extra costs after the casting has been done.
HYSEAL 505
Hyseal® 505 is mainly used to stop water leakages from any concrete structure instantly. Hyseal® 505 is certified where water is spouting or streaming out from any concrete structure, in situation where water oozes out from unsteady concrete or cracks in the concrete, it acts as a water plug. Furthermore, the product is too convenient since it can withstand the pressure of water, it is safe to use in water retaining structure for human utilization.
Packaging:1 Kg and 5 Kg
Coverage: As per the size of the leakage, depending on the user.
Benefits
1. Hyseal 505 is an instant water plugging compound to stop water leakages instantly
2. Can plug and patch any concrete surface that is leaking
3. Does not need any complicated tools or equipment easy to use. Just add water to form a dough and apply as a plug.
HYSEAL ADMIX
HYSEAL 501 (ADMIX) is a blend of active chemicals to waterproof any concrete structure by way of a reaction acting on the cement particles and water in the concrete thereby forming insoluble crystal in the pores of the concrete to block the passage of water. It is most active when mixed with the concrete in the mixer. As the concrete sets, the crystalline chemical reaction begins.
Packaging: 1 Kg
Coverage: An average of 6 Kgs/cubic Meter OR 1Kg bag/50Kgs bag of Cement
Benefits
1. Concrete water tanks
2. Foundation and building basements
3. Sewage and water treatment plants
4. Swimming Pools & Water Ponds
5. Concrete Pipes
6. Waterproofs the entire depth of the Concrete Slab or wall
KENSEAL
This product has been introduced in the market to succeed APP product. Kenseal® is water based elastomeric liquid coating specially formulated from various chemicals which enables it bond to all concrete surfaces.
A UV stabilized product specially made for our equatorial sun and extreme temperature cycle. It can be pigmented to any choice, standard colour is brilliant white. It is used in flat roofs for waterproofing. A screed can be added on top of the kenseal, for extra protection.
Areas of Application:
• As waterproof coating for roofs
• To provide foundation protection
• Roof gutters
KENSEAL PRIMER SEALER
Kenseal® Primer is applied as a primer on the concrete surfaces before application of Kenseal waterproofing.
Kenseal® sealer being colorless, the product neither changes the surface outlook nor makes it glossy. It works well in fresh concrete, as well as dry concrete and stop the ingress of water.
Benefits
1. Used as a primer before application of Kenseal waterproofer
2. Can be applied on fresh concrete as a curing agent
3. Can be applied as a seal coat on stones, Mazeras slabs & cement tiles
KENSEAL 550K
An Acrylic Cement Based Waterproof Slurry Coat. Kenseal 550K brings a hard wearing, seamless waterproof membrane for roofs and foundation protection thus providing effective barrier to waterborne salts, water and atmospheric gases.
Packaging:
Part A Liquid – 7 Litres
Part B Powder – 21 Kg
Coverage: Approximately 1 to 1.5 Kgs per Sq.mt per coat depending on the surface to be applied on. 2 coats application.
Benefits
1. Swimming pools
2. Ponds
3. Gutters
4. Drainage systems
5. Safe for potable water.
Two coat Application is jointless and looks sleek, used where there is stagnant water.
KENSEAL PU - POLYURETHANE WATERPROOFING MEMBRANE (FLEXIBLE)
A liquid applied waterproof coating. A Seamless, Jointless, and continuous Flexible Coating / reinforced with P.U.
Packaging: 4Kg Bucket and 20Kg Bucket
Coverage: Approximately 1/2 KG per Sqm per coat. Required a four coat application.
Benefits
1. Kenseal PU applied on flat roofs, gutters, balconies and terraces.
2. If subsequently covered by other finishes, it will have a longer life span.
3. Very good UV resistance.
4. Can be applied on any shape.
5. White colour reflects the heat.
6. Can be made in any colour, as per the customers requirement.
KENSEAL PRIMER - POROSITY SEALER
Kenseal® Primer is applied as a primer on the concrete surfaces before application of Kenseal waterproofing.
Kenseal® sealer being colorless, the product neither changes the surface outlook nor makes it glossy. It works well in fresh concrete, as well as dry concrete and stop the ingress of water.
Roofing felt - 2 ply
Bitumen saturated & coated on paper base – Thickness 3 ply
Roofing felt - 3 ply
Bitumen saturated & coated on paper base – Thickness 3 ply
Bitumen ( R115/15)
Oxidized Bitumen for bonding roofing felts.
Packaging: 25Kg
It is used for a lot of manufacturing processes making roofing felts, primers and also used in making roads.
They are shipped cold in Bag and heating to become hot until used in the manufacturing process. Most blown bitumen 115/used to produce “mopping-grade” roofing asphalts. These bitumen 115/are generally shipped as a solid and heated in a kettle at the work site.
DPC membrane
Damp proof corse – For stopping rising dampness at thicker level.
Packaging: 1M x 7M x 3mm Roll – Sanded
Coverage: 7 Sqm Per Roll.
Asphalt Shingles
Bitument asphalt shingles
Size: 333mm x 1000mm
Coverage: 1 sq meter = 7pcs, Per Box 3 sq meter = 28pcs
Colours Available: – Royal Red -Jasper – Dark Grey
Advantages of using roofing shingles:
1. Light weight
2. Attractive Appearance 3. Waterproof
4. Easy to install
5. Long Lasting
6. Maintenance Free
Bituseal T3
Bitumen Emulsion
Packaging: 4kg and 20kg
A Bituminous Waterproofing emulsion coating for:
1. Flat roofs
2. Patching Pot holes
3. Re-surfacing worn out or uneven floors
4. Platforms
5. Walk-ways
Bituseal T5
Bitumen Emulsion
Packaging: 4kg and 20kg
A Fibrated Waterproofing Emulsion Coating acting as a barrier to water and moisture.
Used mainly to waterproof:
1. Roofing Felt
2. Concrete/Cement Surfaces
3. Mastic Asphalt
4. Corrugated Iron sheets/metal protection
5. Slate Tiles
6. Shingles roof
Bituseal T7
Heavily Fabricated Bitumen Emulsion
Packaging: 4kg and 20kg
A Heavy Duty Waterproofing Bitumen Emulsion Coating acting as a protective layer. Used as a heavy abrasion resistant waterproofing over insulation on:
1. Tanks
2. Pipes
3. Vessels
4. Boilers
Kenmastic
Kenmastic is a one component water based bitumen
binder for sticking concrete interlocking tiles on roofs
and floors and Protective screed over waterproofing on
flat roofs.
Advantages:
• Seals porous substrates
• Leveling compound on rough surfaces
• Slopping screed to falls and cross falls
• Good chemical and waterproof resistance
Primary Uses:
• Sticking cement interlocking tiles on waterproofed
roofs
• Durable traffic resistant floor screed
KENMASTIC is supplied in 5ltrs, 20ltrs and 200ltrs. Bulk
packing is also available on request.
Kenshield APP modified membrane (plain/mineral grey)
App rolls are a polymer Modified bitumen waterproofing membrane of the highest quality.
Packaging:
1M x 10M x 4mm Roll – Plain
1M x 10M x 4mm Roll – grey Mineral
1M x 10M x 3mm Roll – plain
Coverage: 9 Sqm Per Roll with overlaps
Benefits
App can be applied in:
1. Single or Double layer roofing systems for normal use
2. Waterproofing wet areas like Toilets and inside a building where there are leakages.
3. Gutters and Drains
4. Sub-grade structures.
Kenflex APP modified membrane (plain/grey)
App rolls are a polymer Modified bitumen waterproofing membrane of the highest quality.
Coverage: 9 Sqm Per Roll with overlaps
Benefits
App can be applied in:
1. Single or Double layer roofing systems for normal use
2. Waterproofing wet areas like Toilets and inside a building where there are leakages.
3. Gutters and Drains
4. Sub-grade structures.
Bituroof
Expansion joint sealant
Primer BF 4
Solvent based bitumen primer – A primer for application before APP or roofing felt application.
Packaging: 5 litres and 20 litres
Coverage: 6.6 sq/m – Per litre.
Applied as a primer on roof Screed before application of APP waterproofing membrane can be applied as a protective paint to metal
Marglass Netting (Reinforcement Fiber)
For Bituseal waterproofing. Fibre netting used for waterproofing when applying colas and kenseal
Packaging: 1Meter x 100 Meter roll
Coverage: Covers up to 100sq. metre per roll.
Marglass Mesh is essential to reinforcing the External Insulating Finish System. It can provide the system with enough capacity to contain the movements, caused by thermal excursions or shrinkage, or the insulating material over time, preventing the formation of hairline cracks on the facade.
Flash Band
Flashing to join horizontal and vertical surfaces.
Kenbro Bituminous Aluminum paint
For protection of Colas & APP waterproofing works. High grade roofing alluminium paint for sealing all bituminous roof finishes. To be applied on all Bitumenous roof waterproofing systems,
Eg. On APP, Colas or Ashphalt waterproofing.
Packaging: 4 litres and 20 litres
Coverage: 1.5sq/m per litre depends on surface applied on.
Kensulphide Sealant
For expansion joints
Bituseal Cold
Expansion joint sealant.
Bitumen Rubber Mastic Sealant
Packaging: 20kg
A single Component Bitumen rubber mastic sealant applied when cold. Ideally suited for sealing and filling gaps & joints on roofs, (expansion joints).
Bituseal Hot
Expansion joint sealant
Kenflex sealant PU sausage
Expansion joint sealant
Packaging: 600 cc
Coverage: Depending on the width and depth of expansion joint. Priming is essential.
Benefits
1. Applied as a sealant in the expansion joint to avoid water penetrating through the joint
2. Flexible compound which allows the sealant to stretch and expand according to the buildings movement.
3. Dries to a soft rubber like material but not sticky.
4. For internal interior application.
Extruder gun for Kenflex sealant PU
Gun for Kenflex sealant
Packaging: 1 – Gun, 1 – Plastic nozzel.
Gun for Kenflex sealant
Packaging:
1 – Gun.
1 – Plastic nozzel.
Cartrige Size: 600cc
Benefits
1. Used to hold the Kenflex sealant PU cartrige for easier application.
2. Plastic Nozzel is included in the package for a neat and even application.
3. A 600cc cartridge is to be used in the gun.
Barker rod
Expansion joint sealant backing
Size:
15mm – Linear meter
20mm – Linear meter
25mm – Linear mete
Benefits
1. Used to fill cracks and gaps between building materials.
2. The rod is used to ensure that the depth to be filled the sealant is half the width of gap to be filled
3. The rods have bond breaking properties hence do not bond with the sealant.
4. the sealant only bonds with the building material hence preventing triple bonding.
Expanded insulation boards
Expanded polystyrene insulating board
Size:120cm x 60cm x 5cm
Benefits
1. Thermal board for heat proofing on flat roofs.
2. For cold storage rooms, insulation in walls and floor
3. Hot water piping insulation.
4. It is practically impervious to water.
Hyperseal
Expanding rubber for joint sealing integral.
Hydrophilic waterstop creates an effective compression joint when in contact with water, it swells up to 300% to create a compressed seal.
Size: 15meters roll
Benefits
1. Active protection when in contact with water.
2. Simple application – can be nailed or
suitable adhesive.
3. Slow expansion to prevent damage on
concrete
4. Retains original shape after repeated
contraction.
5. Swelling properties does not affect the strip
in the long run.
6. Sustains effective seal in wet conditions.
FREQUENT QUESTIONS
A roof coating is a protective layer, applied on your roof in order to protect it against climate conditions and other outdoor elements. A waterproof roof coating in specific, will seal your roof, protecting it from moisture, ponding water and ice, preventing leaks and further damages.
Apart from waterproofing your roof, roof coatings can also reduce your utility costs, as most of them have high solar reflectance. In other words, roof coatings help reflect solar radiation, keeping your home cooler during the hot summer days and improving energy efficiency.In general, a good roof coating can protect your roof against extreme weather conditions and extend its life by 10-25 years!
The basic life of any waterproofing solution is around 10-15 years.
It is always best to opt for waterproofing solutions during the construction of your house because this will save time on reconstructing the structure. This is done to handle the leakage, dampness, cracks, or moulds issues afterward.
The bathroom is the wettest area of home. It is always advised to waterproof every corner of the bathroom. Applying for the bathroom waterproofing solutions at every corner and even on the sidewalls can help you prevent dampness and keep your area leak-free for a long time.
Internal walls of your home may experience dampness due to various reasons. The high groundwater table is one of the common issues in India. Similarly, cracks in the walls allow water to ingress from the terrace and external walls and cause dampness. The extreme weather conditions give rise to cracks. The traditional waterproofing methods are incapable of tackling with seepage issues. Kenbro waterproofing solutions help you solve this issue.
MEDIA GALLERY
PRODUCT CATALOGUE
Water proofing, flooring and construction solutions for any building projects.
WE STAND FOR QUALITY!
- Wide range of products to choose
- Quality and Safety guarantee
- Fully fledged manufacturing capacity
- So much value at fair prices
- Based in Nairobi, Kenya
